Dent Removal Question from Simon Ellis

Submitted on 22/02/2011

The dent is about the size that might be made by a golf ball but I'm not sure of the actual cause. The main issue is not the size but the location. As you can see from the pictures it is high on the vertical surface of the bootlid just below where it meets with the horizontal surface. Could this be fixed. Thanks Simon (Hythe, Kent) Model: Ford Mondeo

Simon

That a very difficult dent to do as it go's into the corner meaning that the metal is strong. I would say that we have about an eighty percent chance of getting that eighty percent better or more. Have a read of our guarantee.

OK so I have just looked at our map/direction finder and we are over an hour and a half away from Hythe. So I was going to suggest I got a second opinion before you set off, however I think you may want to read this page as you might be able to find a good dent man/company in your area. And as that dent is a very difficult one, your going to need the best, as it could be the difference between you making a saving or not. After all that reading you may want a rest.

Good Luck

New Again logo

Can We Help You?

"We can offer specialist advice on the best car service to suit your requirements"

When bringing your car to New Again, we often ask you to explain exactly the reason for having your car Protected, Valeted or Repaired. Once we understand exactly what it is you are trying to achieve, we will appraise your vehicle using our detailed appraisal check-sheet allowing us to identify areas of concern and tailor specific services that match your requirements and budget.

If you are not sure what service you need and would like to speak to one of our technicians, simply request a callback by filling in the form on our contact page.