Professional Ceramic Coating

A professional ceramic coating can refer either to the ceramic coating product used by accredited professionals, or a ceramic coating service. These are generally different to ceramic coatings available to the retail public. Professional Ceramic Coatings are sold as part of a service which includes preparing the car.

The coatings, available to professionals and sold as part of a service, are harder to apply correctly and carry some risk if applied incorrectly as they are semi-permanent. The ceramic coatings marketed to the public are a completely different product and essentially long-life waxes which contain some ceramic. They are usually very hydrophobic, but otherwise offer none of the same benefits.

What it means

Professional ceramics are SiO₂/organosilane coatings designed to bond to a properly prepared clear coat. They are applied thin and levelled section by section with strict timing for flash and open time. Studios control panel temperature and humidity, use raking light to spot defects, and may assist cure with IR lamps. Many systems include primers, base coats and toppers, plus documented aftercare and inspection. The headline chemistry helps, but the preparation and process standards are what make the difference.

Why it matters

• Durability: longer service life and better detergent and chemical spot resistance than waxes or basic sealants.
• Appearance: higher clarity and gloss when applied over corrected paint, with tuned beading or sheeting.
• Maintenance: lower surface energy - dirt sticks less, washing and drying are quicker and safer.
• Consistency: pro lighting, timing and towel rotation minimise high spots and patchy cure.
• Documentation: batch details, cure notes and clear aftercare improve outcomes and warranty compliance.

Where you’ll see it

Accredited detailers and specialist studios with climate control and raking light. Often sold with optional glass, wheel and trim coatings, and periodic inspections or top-up services.

Context

Car Paint Protection; Ceramic coatings; Services; Aftercare

Common mistakes

• Expecting scratch-proof or chip-proof performance - coatings improve mar resistance but do not stop impact damage.
• Skipping paint correction then locking in swirls beneath the coating.
• Applying on hot or cold panels or in high humidity - this disrupts flash, wipe-off and cure.
• Leaving high spots that only show in sunlight - always inspect under raking light before release.
• Letting the car get wet before the water-safe window - risk of early water spotting.
• Using strong TFRs every wash - frequent heavy chemistry mutes hydrophobics and shortens perceived life.
• Coating a fresh respray too soon - follow the paint maker’s waiting period and TDS.
• Applying paint ceramics on windscreens - use a dedicated glass coating to avoid wiper judder.

Written by Danny Argent. Last updated 10/11/2025 16:07