Sticky Paint

Sticky Paint is a used to describe soft paintwork which becomes somewhat sticky when polished. It is not something the car owner has to worry about, but it makes the task of polishing a car difficult.

The paintwork on a car can be hard or soft, depending on the manufacturer and their suppliers. It's also the case that when a car is new, the paint can be soft but will get harder over a period of years. A car with very hard or very soft paint can be challenging to anyone attempting to machine polish it.

Cars that are imported from the Far-East sometimes have paintwork which behaves very strangely and acts as if it is sticky, holding polishes and compounds, making it very difficult to avoid smears. There are techniques to overcome this issue.

What it means

Sticky paint is a way detailers describe paintwork that is awkward to polish because it grabs at pads and cloths. The clearcoat is often soft, heat-sensitive or not fully cured, so as you work with a machine polisher the polish can drag, clump and feel like it is sticking to the panel. Residue may smear instead of wiping away cleanly, and the pad can feel as if it is hopping or chattering rather than gliding smoothly.

Why it matters

• Makes correction slower and trickier: Sticky paint rarely behaves nicely with “standard” pad and polish combinations, so it often takes more testing and time to find a method that finishes cleanly.
• Increases risk of defects: Dragging pads, gummed-up product and extra heat can lead to hazing, fresh micro-marring and even localised burnishing instead of a crisp finish.
• Can hide true results: When polish residue refuses to wipe off, it is harder to see what level of correction has been achieved underneath until the surface is fully cleaned down.
• Affects product choice: Sticky paint may demand different compounds, shorter working cycles, more lubricant, softer pads or a switch between rotary and dual action machines to behave properly.

Where you’ll see it

You will see sticky paint mentioned in detailing write-ups, training material and correction estimates. Technicians may say this car has very sticky paint, paint is grabby under the pad or residue is dragging and difficult to remove. It is commonly reported on certain soft OEM finishes, fresh repaints and some Japanese or Italian clearcoats, although any car can show sticky behaviour in the wrong conditions.

Context

Sticky paint is not a specific defect like scratches or holograms – it is more about how the clearcoat behaves when you work it. Factors such as paint chemistry, panel temperature, humidity, product choice and pad cleanliness all play a part. On some cars, the same polish that works perfectly elsewhere will suddenly become grabby, dust heavily, or refuse to wipe off. Experienced detailers adapt by changing pad type, polish, machine speed, pressure, work size and wipe-down products until the system becomes predictable and finishes down clean.

Common mistakes

• Persisting with the same pad and compound while the paint is clearly dragging and smearing, instead of adjusting the approach.
• Working large areas for too long so the panel overheats, making already sticky paint even more grabby and difficult to finish.
• Using very aggressive pads on soft, sticky clearcoat and then chasing the extra haze and micro-marring they create.
• Judging the result while polish residue is still smeared over the panel, rather than carrying out proper wipe-downs to see the true finish underneath.

Written by Danny Argent. Last updated 21/11/2025 16:10